Related Experiment Video
Updated: Jul 11, 2026

Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions
Published on: July 22, 2013
Gate-tuned high frequency response of carbon nanotube Josephson junctions
J-P Cleuziou1, W Wernsdorfer, S Andergassen
1Université de Toulouse, CEMES-CNRS, BP 94347, 31055 Toulouse Cedex 4, France.
Abstract:
Carbon nanotube Josephson junctions in the open quantum dot limit are fabricated using Pd/Al bilayer electrodes, and exhibit gate-controlled superconducting switching currents. Shapiro voltage steps can be observed under radio frequency current excitations, with a damping of the phase dynamics that strongly depends on the gate voltage. These measurements are described by a standard resistively and capacitively shunted junction model showing that the switching currents from the superconducting to the normal state are close to the critical current of the junction. The effective dynamical capacitance of the nanotube junction is found to be strongly gate dependent, suggesting a diffusive contact of the nanotube.
More Related Videos
Related Concept Videos
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Frequency Response of BJT
Low-Frequency Response: At low frequencies, the behavior of the BJT is determined by its DC bias point, which is set by the...
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Cut-off Frequency of BJT
Alpha Cut-Off Frequency: Pertinent to the common-base configuration, the alpha cut-off frequency defines the upper-frequency limit at which the current gain, alpha, remains stable. As...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the gate...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...

