Related Experiment Video
Updated: Jul 10, 2026

Microperfusion Technique to Investigate Regulation of Microvessel Permeability in Rat Mesentery
Published on: September 12, 2015
Microvascular oxygen tension in the rat mesentery
Aleksander S Golub1, Matthew C Barker, Roland N Pittman
1Department of Physiology, Medical College of Virginia Campus, Virginia Commonwealth University, 1101 E. Marshall Street, Richmond, VA 23298-0551, USA.
Abstract:
Longitudinal Po(2) profiles in the microvasculature of the rat mesentery were studied using a novel phosphorescence quenching microscopy technique that minimizes the accumulated photoconsumption of oxygen by the method. Intravascular oxygen tension (Po(2), in mmHg) and vessel diameter (d, in microm) were measured in mesenteric microvessels (n = 204) of seven anesthetized rats (275 g). The excitation parameters were as follows: 7 x 7-microm spot size; 410 nm laser; and 100 curves at 11 pulses/s, with pulse parameters of 2-micros duration and 80-pJ/microm(2) energy density. The mean Po(2) (+/- SE) was 65.0 +/- 1.4 mmHg (n = 78) for arterioles (d = 18.8 +/- 0.7 microm), 62.1 +/- 2.0 mmHg (n = 38) at the arteriolar end of capillaries (d = 7.8 +/- 0.3 microm), and 52.0 +/- 1.0 mmHg (n = 88) for venules (d = 22.5 +/- 1.0 microm). There was no apparent dependence of Po(2) on d in arterioles and venules. There were also no significant deviations in Po(2) based on d (bin width, 5 microm) from the general mean for both of these types of vessels. Results indicate that the primary site of oxygen delivery to tissue is located between the smallest arterioles and venules (change of 16.3 mmHg, P = 0.001). In conclusion, oxygen losses from mesenteric arterioles and venules are negligible, indicating low metabolic rates for both the vascular wall and the mesenteric tissue. Capillaries appear to be the primary site of oxygen delivery to the tissue in the mesenteric microcirculation. In light of the present results, previously reported data concerning oxygen consumption in the mesenteric microcirculation can be explained as artifacts of accumulated oxygen consumption due to the application of instrumentation having a large excitation area for Po(2) measurements in slow moving and stationary media.

