Arsenic removal by iron and manganese coated sand

In this study, as a promising technique for the treatment of both As(III) and As(V) at the same time in a single reactor, a column reactor containing both manganese-coated sand (MCS) and iron-coated sand (ICS), at different configuration of MCS and ICS, was used to treat wastewater contaminated with As(III). Prior to column experiments, batch experiments for the adsorption of As(V) by ICS were performed with variation of solution pH, ionic strength and types of background ions to investigate the effect of these parameters on the As(V) adsorption behaviour. As(V) adsorption onto ICS was quite similar with the variation of ionic strength by using NaNO3 as a background ion as well as in the presence of different types of background ions except phosphate. The adsorption curves shifted to the lower pH region with the increase of the initial arsenic concentration due to the finite number of adsorption sites on the ICS. For model prediction on the adsorption of As(V) onto ICS, the MINEQL program employing an inner-sphere complexation and a diffuse layer model was used. Model predictions generally agreed well with experimental results. From the column test, column system packed with equal ratio of MCS and ICS was identified as the best system due to a promising oxidation efficiency of As(III) to As(V) by MCS and adsorption of As(V) by both MCS and ICS.