A carbonate controlled-addition method for amorphous calcium carbonate spheres stabilized by poly(acrylic acid)s

Stable amorphous calcium carbonate (ACC) composite particle with a size-controlled monodispersed sphere was obtained by a new simple carbonate controlled-addition method by using poly(acrylic acid) (PAA) (Mw = 5000), in which an aqueous ammonium carbonate solution was added into an aqueous solution of PAA and CaCl2 with a different time period. The obtained ACC composite products consist of about 50 wt % of ACC, 30 wt % of PAA, and H2O. Average particle sizes of the ACC spheres increased from (1.8 +/- 0.4) x 102 to (5.5 +/- 1.2) x 102 nm with an increase of the complexation time of the PAA-CaCl2 solution from 3 min to 24 h, respectively. The ACC formed from the complexation time for 3 min was stable for 10 days with gentle stirring as well as 3 months under a quiescent condition in the aqueous solution. Moreover, the ACC was also stable at 400 degrees C. Stability of the amorphous phase decreased with an increase of the complexation time of the PAA-CaCl2 solution. No ACC was obtained when the lower molar mass PAAs (Mw = 1200 and 2100) were used. In the higher molar mass case (Mw = 25 000), a mixture of the amorphous phase and vaterite and calcite crystalline product was produced. The present results demonstrate that the interaction and the reaction kinetics of the PAA-Ca2+-H2O complex play an important role in the mineralization of CaCO3.