Related Experiment Video
Updated: Jun 18, 2026

Measuring Carbon-based Contaminant Mineralization Using Combined CO2 Flux and Radiocarbon Analyses
Published on: October 21, 2016
Flow to a well in a five-layer system with application to the Oxnard Basin
1Department of Hydrology and Water Resources, 1133 E. James E. Rogers Way, University of Arizona, Tucson, AZ 85720, USA.
Abstract:
Nearly 40 years ago, Neuman (1968) developed an analytical solution for drawdown in a system of three aquifers separated by two aquitards when one of the aquifers is pumped at a constant rate. Whereas the simpler case of two aquifers separated by one aquitard has been presented by Neuman and Witherspoon (1969a), the full five-layer solution has not been previously evaluated. We do so here using numerical inversion of its Laplace-transformed version and present selected results graphically in dimensionless form. The solution demonstrates that the effect of pumping propagates across all five layers, adding emphasis to a question previously raised by Neuman and Witherspoon about the validity of leaky aquifer theories that disregard drawdowns in unpumped aquifers. A large-scale, long-term pumping test spanning three aquifers separated by two aquitards near Oxnard, California, has been conducted and analyzed by Neuman and Witherspoon (1972). They evaluated the vertical hydraulic diffusivities of the aquitards using the Neuman-Witherspoon ratio method and their specific storage values on the basis of laboratory consolidation tests. We reinterpret the Oxnard pumping test by coupling the five-layer analytical solution of Neuman (1968) with the parameter estimation code PEST (Doherty 2002) and validate our results against drawdowns from a subsequent pumping test at the site. Our parameter estimates compare favorably with those of Neuman and Witherspoon (1972).
Related Concept Videos
Steady Flow of a Fluid Stream
During this process, the momentum of the fluid within the control volume remains constant over the time interval dt. By applying the...
Capillarity in Fluid
Surface tension is crucial to capillarity. It results from cohesive forces between liquid molecules at the liquid-air boundary, forming a skin that resists external forces. When the capillary tube...
Design Example: Flow of Oil Through Circular Pipes
Uniform Depth Channel Flow
Uniform Depth Channel Flow: Problem Solving
Gradually Varying Flow

