A slim needle-shaped multiwire microelectrode for intracerebral recording

The construction of a needle-shaped multiwire microelectrode is described. It can be made with simple mechanical tools. The presented electrode assembly consists of 12 insulated nichrome wires (core diameter 25 microns) which are embedded in epoxylite resin. The straight-cut wire tips are aligned lengthwise and have a relative spacing of 150 microns. Outer dimensions vary from 100 x 180 microns at the level of the 1st electrode channel, to 100 x 100 microns at the level of the 12th channel at the tip. The configuration of this electrode was determined by its application: the laminar analysis of evoked potentials in the cortex of the rat. However, the number of channels, the diameter of the (nichrome) wire which determines the surface area of these channels, and the channel spacing can be easily adjusted during construction to meet other experimental requirements, such as the recording of single-unit activity. The electrode which is composed of biocompatible materials is suited for the study of field potentials and multiple-unit activity, in both acute and chronic experiments, and can be used repeatedly. To demonstrate the performance of the electrode assembly, a depth profile of field potentials is presented, accompanied by the corresponding current source density distribution. The potentials were recorded in the somatosensory cortex of the rat following stimulation of the median nerve under ketamine anesthesia.