Method of phase extraction between coupled atom interferometers using ellipse-specific fitting

Interference leads to systematic error in atomic absorption (AA) measurements by enhancing or diminishing the analytical signal or the background. These interferences can be grouped into three main categories: spectral interference, chemical interference, and physical interference.
Spectral interference occurs when signals from other elements or molecules overlap with the analyte signal, falsely elevating or masking the analyte's absorbance. This interference can be corrected using Zeeman,...

In atomic emission spectroscopy (AES), high-temperature atomizers excite a broad range of elements and molecules that generate complex emissions from sources such as oxides, hydroxides, and flame combustion products in the flame or plasma. Several strategies can be employed to minimize spectral interferences caused by overlapping emission lines or bands. These include increasing instrument resolution, choosing alternative emission lines, optimally placing the detector in low-background regions,...

An ellipse is a fundamental conic section defined by the constant sum of distances from any point on its curve to two fixed points, known as the foci. This geometric property can be physically demonstrated using a pencil, string, and two pins. By anchoring the string at both ends and maintaining it taut with a pencil, one can trace the outline of an ellipse.The shape and extent of the ellipse are determined by its eccentricity, e, defined as the ratio of the distance between the center and a...

Inductively coupled plasma (ICP) is the common plasma source used in atomic emission spectroscopy (AES), a technique that detects and analyzes various elements in a sample. This method is often called inductively coupled plasma atomic emission spectroscopy (ICP-AES).
There are three main types of inductively coupled plasma atomic emission spectroscopy  (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used.

An ellipse is formed when a right circular cone is intersected by an inclined plane that does not cut through its base. This intersection yields a closed, symmetric curve characterized by distinctive geometric properties. Most notably, an ellipse is defined as the collection of all points in a plane for which the combined distances to two fixed points—called the foci—remain constant.The ellipse features two principal axes: the major and the minor axes. The major axis is the longest diameter,...

Atomic Absorption Spectroscopy (AAS) atomizes samples through flame atomization or electrothermal atomization. Flame atomization typically involves a nebulizer and spray chamber assembly to combine the sample with a fuel–oxidant mixture, creating a fine aerosol mist that enters a burner. Typically, the fuel and oxidant are combined in an approximately stoichiometric ratio. However, for atoms that are easily oxidized, a fuel-rich mixture may be more advantageous. Only about 5% of the aerosol...