Related Experiment Video
Updated: Jul 9, 2026

Laryngeal Mask Airway (LMA) Placement in a Neonatal Patient Simulator Using a Non-Inflatable Supraglottic Airway (SGA)
Published on: July 14, 2023
Programming pressure support ventilation in pediatric patients in ambulatory surgery with a laryngeal mask airway
Javier Garcia-Fernandez1, Gerardo Tusman, Fernando Suarez-Sipmann
1Pediatric Anesthesiology and Postsurgical Critical Care Department, La Paz Universitary Hospital, Madrid, Spain. jgarciaf.hulp@madrid.salud.org
Background:
Anesthesia workstations with pressure support ventilation (PSV) are available, but there are few studies published on how to program flow-triggered PSV using a laryngeal mask airway (LMA) under general anesthesia in pediatric patients.
Methods:
We studied 60 ASA I and II patients, from 2 mo to 14 yr, scheduled for ambulatory surgery under combined general and regional anesthesia with a LMA. Patients were classified according to their body weight as follows: Group A < or =10 kg, Group B 11-20 kg, and Group C >20 kg. All were ventilated in PSV using the following settings: positive end-expiratory pressure of 4 cm H2O, the minimum flow-trigger without provoking auto-triggering, and the minimum level of pressure support to obtain 10 mL/kg of tidal volume.
Results:
The flow-trigger most frequently used in our study was 0.4 L/min, ranging from 0.2 to 0.6 L/min. We found no correlation between the flow-trigger setting and the patient's age, weight, compliance, resistance, or respiratory rate. There was a good correlation between the level of pressure support (Group A = 15 cm H2O, Group B = 10 cm H2O and Group C = 9 cm H2O) and age (P < 0.001), weight (P < 0.001), dynamic compliance (P < 0.001), and airway resistances (P < 0.001).
Conclusions:
PSV with a Proseal LMA in outpatient pediatric anesthesia can be programmed simply using the common clinical noninvasive variables studied. However, more studies are needed to estimate the level of pressure support that may be required in other clinical situations (respiratory pathology, endotracheal tubes, or other types of surgeries) or with other anesthesia workstations.
Related Concept Videos
Cardiopulmonary Resuscitation II: ACLS Airway Management
Cardiopulmonary Resuscitation V: Advanced Airway Management Techniques
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation (NIPPV)
Tracheostomy Suctioning I: Pre-Procedural Steps
Equipment Required
First, gather all necessary equipment: a sterile suction catheter, a sterile disposable container, sterile gloves, a towel or...
