Related Experiment Video
Updated: Jul 9, 2026

Physical, Chemical and Biological Characterization of Six Biochars Produced for the Remediation of Contaminated Sites
Published on: November 28, 2014
Polychlorinated dibenzo-p-dioxins/dibenzofurans distributions in ash from different units in a municipal solid waste
Yu-Sheng Lin1, Kang-Shin Chen, Yuan-Chung Lin
1Institute of Environmental Engineering, National Sun Yat-Sen University, Kaohsiung 804, Taiwan.
Abstract:
This study determined the polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) contents in ash in the super heater (SH), economizer (EC), semi-dryer absorber (SDA), fabric filter (FF), fly ash pit (FAP) and bottom residue (BR) in a municipal solid waste incinerator (MSWI). A high-resolution gas chromatograph/high-resolution mass spectrometer (HRGC/HRMS) was utilized for analyzing 17 PCDD/F species. Experimental results showed that average PCDD/F contents in ash samples from the SH, EC, SDA, FF, FAP and BR were 0.102, 0.788, 0.210, 1.95, 2.04 and 0.0218 ng I-TEQ g(-1), respectively. PCDD/F content was very low in the SH and BR due to high temperatures (around 461 degrees C in the SH and 914 degrees C in combustion chamber). Conversely, total PCDD/F content was significantly high in ash samples from the EC (around 340 degrees C), mainly because the temperature is within the favorable range of 250-400 degrees C for PCDD/F formation due to de nova reformation mechanisms. Although the SDA operated at 245 degrees C, the PCDD/F content decreased very significantly, mainly because the temperature was relatively low and because calcium carbonate was introduced into flue gases to dechlorinate and dilute chlorine-containing species. PCDD/Fs were captured by the active carbon in the FF. Furthermore, the duration that fly ash remained in the FF was longer than that for other incinerator units, and thus causing an increasing trend of PCDD/Fs level downstream (except the SDA). Total PCDD/Fs emission factors (microg tonnes-waste(-1); microg I-TEQ tonnes-waste(-1)) in ash samples from different units were: SH (42.3; 0.846), EC (326; 6.12), SDA (58.1; 1.10), FF (1540; 61.3), FAP (2950; 107) and BR (537; 4.31). Most PCDD/Fs in ash were contributed by the FF (about 56%), and the generation of PCDD/Fs in ash was significant (about 35%) during the transfer process from different units to the FAP. A strong and positive correlation in a logarithmic form existed between PCDD/Fs and chlorine (Cl(-1)) contents in ash. In Taiwan, the government policy for incineration residues advocates their reuse as road sub-bases or secondary building materials provided that total PCDD/Fs content is below the legal limit (1 ng I-TEQ g(-1)). Thus, ash with total PCDD/Fs content below the legal limit, such as that from the SH, EC, SDA and BR, can be collected and transferred to the FAP and reused. Ash with total PCDD/Fs content exceeding the legal limit, such as that from the FF, should be collected separately and be treated properly before being disposal in a landfill.
More Related Videos
04:17Analysis of Organochlorine Pesticides in a Soil Sample by a Modified QuEChERS Approach Using Ammonium Formate
Published on: January 20, 2023
10:10Assessment of the Acute Inhalation Toxicity of Airborne Particles by Exposing Cultivated Human Lung Cells at the Air-Liquid Interface
Published on: February 23, 2020
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Atomic Emission Spectroscopy: Interference
Sampling Plans
Random sampling is a method where each member of the population has an equal chance of being selected for the sample. It involves selecting individuals randomly, often using random number generators or lottery-type methods. For example, when analyzing the properties of a...