Related Experiment Video
Updated: Jul 8, 2026

Fiber Optic Distributed Sensors for High-resolution Temperature Field Mapping
Published on: November 7, 2016
All-fiber absolute temperature sensor using an unbalanced high-birefringence Sagnac loop
Abstract:
We demonstrate a highly sensitive temperature sensor based on a stress-induced high-birefringence-fiber Sagnac loop that uses a Nd-doped-fiber amplified spontaneous emission source. Relative temperature sensing is done in the spectral domain by shifts of a resonant wavelength lambda(r) and absolute temperature sensing by changes in separation between resonances Dlambda . The measured relative change of these parameters with temperature in the range 15-110 degrees C, is (1/lambda(r))(deltalambda(r)/deltaT) = -(1/Dlambda)(deltaDlambda/delta T) approximately (1/Dn)(delta Dn/deltaT)(-0.94 +/- 0.02) x 10(-3)/K, with measured fiber birefringence Dn = 8 x 10(-4) . This gives a wavelength-shift sensitivity of -1.00 nm/K at 1.065 microm and a resonance separation sensitivity of 0.006 nm/K for Dlambda = 6.8 nm . This telemetric point sensor has a loop length of 80 m, an operational bandwidth of more than 50 nm, and a temperature accuracy of better than 1 degrees C.
Related Concept Videos
Temperature Measurement Sites
Oral: When assessing oral temperature, the thermometer tip should be placed under the tongue in the posterior sublingual pocket. It offers accurate readings and can be...
Equipments Used to Measure Body Temperature
Glass-bulb Thermometer:
Glass-bulb thermometers are hollow glass tubes with a bulb tip containing liquid such as ethanol or mercury. Historically, glass bulb mercury thermometers were the standard device to measure body temperature. Today, mercury thermometers are prohibited in many countries due to the hazardous effects of mercury and the risk of exposure if the glass bulb breaks. In general,...
Assessing Body Temperature - Temporal Artery
Step 1: Perform hand hygiene and don a fresh pair of gloves to prevent cross-infection and ensure patient safety.
Step 2: Explain the procedure to the patient to establish trust. Clear communication establishes trust with the patient, ensures they understand what to expect, promotes cooperation, and enhances comfort during the procedure.
Step 3: Assess the patient's forehead...

