Related Experiment Videos
Polymerization shrinkage, impact strength and roughness of montmorillonite-modified denture base resins
S M Collard1, A Karimzadeh, L T Smith
1Department of Dental Materials, Baylor College of Dentistry, Dallas.
Abstract:
Montmorillonite (MMT) was added to two commercial denture base resins, Lucitone (LU) and Accelar (AC) in amounts varying from 0-8 weight percent (wt%). The linear polymerization shrinkage, impact strength and average roughness or polishability were measured after specimens were processed using standard methods. The linear polymerization shrinkage was 1.37 and 1.02% for the unmodified denture base resins and the impact strength was 37.36 and 20.02 J/m; while the average roughness after polishing was 0.026 and 0.047 microns for LU and AC, respectively. The addition of MMT significantly (P less than 0.05) reduced the linear polymerization shrinkage and impact strength, while increasing the roughness of LU and AC.