Related Experiment Video
Updated: Jul 7, 2026

Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Thermodynamics and kinetics of cadmium adsorption onto oxidized granular activated carbon
Xin Huang1, Nai-yun Gao, Qiao-li Zhang
1State Key Laboratory of Pollution Control and Resource Reuse, Tongji University, Shanghai 200092, China. huangxin_china@163.com
Abstract:
Cadmium sorption behavior of granular activated carbon oxidized with nitric acid was systematically studied by sets of the equilibrium and time-based experiments under various conditions. The cadmium adsorption capacity of oxidized granular activated carbon enlarged with an increase in pH, and reduced with an increase in ionic strength. Experimental data were evaluated to find out kinetic characteristics. Adsorption processes were found to follow pseudo-second order rate equation. Adsorption isotherms correlate well with the Langmuir isotherm model and the maximum sorption capacity of cadmium evaluated is 51.02 micromol/g. Thermodynamic parameters were calculated based on Van't Hoff equation. Equilibrium constant Kd was evaluated from Freundlich isotherm model constants, Langmuir isotherm model constants, and isotherms, respectively. The average change of standard adsorption heat DeltaH0 was -25.29 kJ/mol. Negative DeltaH0 and DeltaG0 values indicate the adsorption process for cadmium onto the studied activated carbon is exothermic and spontaneous. The standard entropy DeltaS0 was also negative, which suggests a decrease in the freedom of the system.
More Related Videos
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
09:22Synthesis and Performance Evaluations of ZnCoS/ZnCdS with Twin Crystal Structure for Multifunctional Redox Photocatalysis in Energy Applications
Published on: July 25, 2025
Related Concept Videos
Adsorption of Gases on Solids
Heterogeneous Catalysis
Adsorption Isotherms I
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Catalysis