Related Experiment Video
Updated: Jul 7, 2026

Resource Recycling of Red Soil to Synthesize Fe2O3/FAU-type Zeolite Composite Material for Heavy Metal Removal
Published on: June 2, 2022
Adsorption of heavy metals onto sewage sludge-derived materials
1IRENA (Natural Resources Institute), Department of Chemical Engineering, University of León, Avenida de Portugal 41, 24071 León, Spain.
Abstract:
Two materials were produced from sewage sludge by: (1) pyrolysis of dried sewage sludge (PS); (2) chemical activation of dried sewage sludge with ZnCl(2) followed by pyrolysis (AS). The aim was to study the application of these materials for metal purification from water and to determine the efficiency of each material. Although AS displayed higher capacity, both PS and AS were able to adsorb these metals and the preferential order was equal: Hg(II)>Pb(II)>Cu(II)>Cr(III). For each metal-adsorbent pair, metal adsorption was highly pH dependent. In all cases the equilibrium was well described both by the Langmuir and the Freundlich isotherms. At the corresponding optimum pH, AS showed the following adsorption capacities: 175.4, 64.1, 30.7 and 15.4 mg/g of Hg(II), Pb(II), Cu(II) and Cr(III), respectively. These results indicate the potential application of these sewage sludge based adsorbents for the treatment of metal polluted effluents.
More Related Videos
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
15:19Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Related Concept Videos
Microbial Bioremediation of Uranium
Biological Treatment of Effluent and Waste Water
Acid Mine Drainage
Microbial Leaching
Extraction: Advanced Methods
Bioremediation