Related Experiment Video
Updated: Jul 7, 2026

Pipeline for Planning and Execution of Transcranial Ultrasound Neuromodulation Experiments in Humans
Published on: June 28, 2024
Theoretical study of steady-state temperature rise within the eye due to ultrasound insonation
1Center for Devices and Radiol. Health, Food and Drug Adm., Rockville, MD.
Abstract:
The soft tissue thermal index (TIS), as defined in the AIUM/NEMA Output Display Standard, may not be relevant with respect to eye exposure, primarily because of differences in actual vs. assumed acoustic and thermal properties. Therefore, a theoretical study of temperature rise within the eye due to ultrasound insonation was undertaken to compare the TIS with more exact calculations. At each plane in the direction of propagation, the focused ultrasound beam was modeled as a disc of uniform intensity. Each disc becomes a heat source, and integration over all discs provides the total temperature rise at any axial position. Calculations were done assuming the ultrasound beam intersects the lens of the eye as well as for the case in which the beam does not intersect the lens. Results were found for frequencies of 7.0 MHZ to 40 MHZ, transducer diameters of 0.2 cm to 1.0 cm, and focal lengths ranging from 0.2 cm to 3.0 cm. Perfusion was assumed negligible and thermal and acoustic parameters were taken from reported studies. For every case, the ratio of maximum temperature rise to the TIS (assuming constant output power) was calculated. For the lens case, the ratio varied from 7.35 to 0.8. For the no-lens case, the ratio varied from 4.1 to 0.4. These results indicate that the TIS is not adequate to represent the temperature rise occurring within the eye upon insonation.
Related Concept Videos
Ultrasonography
During an ultrasonography procedure, a handheld device called a...
Absorption of Radiation
Imaging Studies II: Ultrasonography
Assessing Body Temperature - Tympanic membrane
Step 1: Begin by practicing good hand hygiene to prevent the transmission of microorganisms.
Step 2: Turn on the thermometer and wait until the ready sign appears on the screen to ensure accurate measurement.
Step 3: Slide the probe cover in place to prevent cross-contamination.
Step 4: Instruct the patient to tilt their head to the side for comfort and check for cerumen...

