Related Experiment Video
Updated: Jul 7, 2026

WheelCon: A Wheel Control-Based Gaming Platform for Studying Human Sensorimotor Control
Published on: August 15, 2020
Robust quasi-LPV control based on neural state-space models
1Dept. of Control Eng., Aalborg Univ.
Abstract:
We derive a synthesis result for robust linear parameter varying (LPV) output feedback controllers for nonlinear systems modeled by neural state-space models. This result is achieved by writing the neural state-space model on a linear fractional transformation (LFT) form in a nonconservative way, separating the system description into a linear part and a nonlinear part. Linear parameter-varying control synthesis methods are then applied to design a nonlinear control law for this system. Since the model is assumed to have been identified from input-output measurement data only, it must be expected that there is some uncertainty on the identified nonlinearities. The control law is therefore made robust to noise perturbations. After formulating the controller synthesis as a set of linear matrix inequalities (LMIs) with added constraints, some implementation issues are addressed and a simulation example is presented.
Related Concept Videos
State Space Representation
Consider an RLC circuit, a...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal and...
State Space to Transfer Function
The transformation process begins with the state-space representation, characterized by the state equation and the output equation. These equations are typically represented as:
Transfer Function to State Space
In an RLC...
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length, the...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
