Related Experiment Video
Updated: Jul 7, 2026

Studying Large Amplitude Oscillatory Shear Response of Soft Materials
Published on: April 25, 2019
Acoustoelasticity in soft solids: assessment of the nonlinear shear modulus with the acoustic radiation force
J-L Gennisson1, M Rénier, S Catheline
1Laboratoire Ondes et Acoustique, ESPCI, CNRS UMR 7587, INSERM, Université Paris VII, 10 rue Vauquelin, 75231 Paris cedex 05, France. jl.gennisson@espci.fr
Abstract:
The assessment of viscoelastic properties of soft tissues is enjoying a growing interest in the field of medical imaging as pathologies are often correlated with a local change of stiffness. To date, advanced techniques in that field have been concentrating on the estimation of the second order elastic modulus (mu). In this paper, the nonlinear behavior of quasi-incompressible soft solids is investigated using the supersonic shear imaging technique based on the remote generation of polarized plane shear waves in tissues induced by the acoustic radiation force. Applying a theoretical approach of the strain energy in soft solid [Hamilton et al., J. Acoust. Soc. Am. 116, 41-44 (2004)], it is shown that the well-known acoustoelasticity experiment allowing the recovery of higher order elastic moduli can be greatly simplified. Experimentally, it requires measurements of the local speed of polarized plane shear waves in a statically and uniaxially stressed isotropic medium. These shear wave speed estimates are obtained by imaging the shear wave propagation in soft media with an ultrafast echographic scanner. In this situation, the uniaxial static stress induces anisotropy due to the nonlinear effects and results in a change of shear wave speed. Then the third order elastic modulus (A) is measured in agar-gelatin-based phantoms and polyvinyl alcohol based phantoms.
Related Concept Videos
Elastic Strain Energy for Shearing Stresses
Relation between Poisson's ratio, Modulus of Elasticity and Modulus of Rigidity
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
Elastic Strain Energy for Normal Stresses
If...
Sound as Pressure Waves
The pressure fluctuation depends on the difference in displacements between the successive points in the...
Strain and Elastic Modulus

