Related Experiment Video
Updated: Jul 7, 2026
08:48
Writing Bragg Gratings in Multicore Fibers
Published on: April 20, 2016
Characterization of apodized fiber Bragg gratings for rejection filter applications
J Canning1, D C Psaila, Z Brodzeli
1Australian Photonics Cooperative Research Centre, 101 National Innovation Centre, Eveleigh, New South Wales 1430, Australia.
Applied Optics
|February 12, 2008
Abstract:
Apodized fiber Bragg gratings with > or = 30-dB sidelobe suppression +/-1 nm from the Bragg center wavelength are spatially characterized with side-scatter and side-diffraction techniques. Resonant side scatter is suppressed, indicating that little dispersion arises from reflections off the grating boundaries.
Related Concept Videos
01:25Active Filters
Active filters are electronic circuits that use operational amplifiers (op-amps), resistors, and capacitors to filter out unwanted frequency components from a signal. A first-order low-pass active filter is designed to pass signals with a frequency lower than a certain cutoff frequency and attenuate frequencies higher than that cutoff frequency. The transfer function for a first-order low-pass active filter is:
01:27Passive Filters
Passive filters are utilized to shape the frequency spectrum of signals across a diverse array of applications. These filters, using only passive elements like resistors (R), inductors (L), and capacitors (C), are capable of selectively allowing or blocking certain frequency ranges without the need for external power sources.
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff frequency...
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff frequency...