[Influence of water source switching on water quality in drinking water distribution system]
Yang Wang1, Zhang-bin Niu, Xiao-jian Zhang
1Department of Environmental Science and Engineering, Tsinghua University, Beijing 100084, China. wangyang00@mails.tsinghua.edu.cn
Abstract:
This study investigates the regularity of the change on the physical and chemical water qualities in the distribution system during the process of water source switching in A city. Due to the water source switching, the water quality is chemical-astable. Because of the differences between the two water sources, pH reduced from 7.54 to 7.18, alkalinity reduced from 188 mg x L(-1) to 117 mg x L(-1), chloride (Cl(-)) reduced from 310 mg x L(-1) to 132 mg x L(-1), conductance reduced from 0.176 S x m(-1) to 0.087 S x m(-1) and the ions of calcium and magnesium reduced to 15 mg x L(-1) and 11 mg x L(-1) respectively. Residual chlorine changed while the increase of the chlorine demand and the water quantity decreasing at night, and the changes of pH, alkalinity and residual chlorine brought the iron increased to 0.4 mg x L(-1) at the tiptop, which was over the standard. The influence of the change of the water parameters on the water chemical-stability in the drinking water distribution system is analyzed, and the controlling countermeasure is advanced: increasing pH, using phosphate and enhancing the quality of the water in distribution system especially the residual chlorine.
Related Concept Videos
Quality of Water
Testing Water Quality
Regulation of Water Output
Freshwater Microbial Ecology
Design Example: Designing a Residential Plumbing System
Multiple Pipe Systems
Series Configuration
In a series configuration, fluid flows sequentially from one pipe...


