Related Experiment Video
Updated: Jul 7, 2026

Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements
Published on: February 28, 2016
Polarization-independent optical fiber modulator by use of polymer-dispersed liquid crystals
K Takizawa1, K Kodama, K Kishi
1Science and Technical Research Laboratories, Japan Broadcasting Corporation, 1-10-11 Kinuta, Setagaya-ku, Tokyo 157, Japan.
Abstract:
Ultrasmall light modulators have been made by sandwiching a polymer-dispersed liquid crystal (PDLC) between two ferrules with optical fibers. The device can modulate light independent of the state of polarization, because the PDLC becomes transparent or opaque when either sufficient or no voltage is applied to the film. The PDLC was prepared by mixing and annealing a prepolymer and nematic liquid crystal with large anisotropy. An optical fiber modulator with a 30-microm thick PDLC film had an extinction ratio of 8:1-33:1, an insertion loss of 1.3 dB, and rise and decay times of 4 ms at a wavelength of 1.3 microm.
Related Concept Videos
Group Polarization
Dielectric Polarization in a Capacitor
Polymer Classification: Crystallinity
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
Polymer Classification: Stereospecificity

