Related Experiment Video
Updated: Jul 7, 2026

Measurement of X-ray Beam Coherence along Multiple Directions Using 2-D Checkerboard Phase Grating
Published on: October 11, 2016
Edge enhancement by use of moving gratings in a bismuth silicon oxide crystal and its application to optical
Abstract:
The technique of moving gratings in a photorefractive crystal is applied to the edge enhancement of objects and edge-enhanced optical correlation. The nonlinear dependence of the optimum fringe velocity on the fringe modulation and the variation of the enhancement of the diffraction efficiency with fringe modulation at a fixed fringe velocity appropriate to high fringe modulations are experimentally investigated. It is shown that the diffraction at high fringe modulations, which corresponds to the high-spatial-frequency components of the Fourier spectrum, is enhanced by a factor of approximately 3.7, whereas the diffraction at low fringe modulations is suppressed by a factor of 0.6. The proposed technique has the advantages of real-time enhancement, arbitrary selection of the spatial frequency to be enhanced, and improved stability of the output. Experimental results of the edge enhancement of objects and edge-enhanced correlation are presented.
Related Concept Videos
X-ray Crystallography
Diffraction
Diffraction is the change in the direction of travel experienced by an electromagnetic wave when it encounters a physical barrier whose dimensions are comparable to those of the wavelength of the light. X-rays are electromagnetic radiation with wavelengths about as long as the distance between neighboring...
Phase Contrast and Differential Interference Contrast Microscopy
In-phase-contrast microscopes, interference between light directly passing through a cell and light refracted by cellular components is used to create high-contrast, high-resolution images without staining. It is the oldest and simplest type of microscope that creates an image by altering the wavelengths of light rays passing through the specimen. Altered wavelength paths are created using an annular stop in the condenser. The annular stop produces a hollow cone of...

