Related Experiment Videos
Nonlinear image recovery with half-quadratic regularization
Abstract:
One popular method for the recovery of an ideal intensity image from corrupted or indirect measurements is regularization: minimize an objective function that enforces a roughness penalty in addition to coherence with the data. Linear estimates are relatively easy to compute but generally introduce systematic errors; for example, they are incapable of recovering discontinuities and other important image attributes. In contrast, nonlinear estimates are more accurate but are often far less accessible. This is particularly true when the objective function is nonconvex, and the distribution of each data component depends on many image components through a linear operator with broad support. Our approach is based on an auxiliary array and an extended objective function in which the original variables appear quadratically and the auxiliary variables are decoupled. Minimizing over the auxiliary array alone yields the original function so that the original image estimate can be obtained by joint minimization. This can be done efficiently by Monte Carlo methods, for example by FFT-based annealing using a Markov chain that alternates between (global) transitions from one array to the other. Experiments are reported in optical astronomy, with space telescope data, and computed tomography.
Related Concept Videos
Quadratic Models
Reconstruction of Signal using Interpolation
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear.
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length, the...
Residuals and Least-Squares Property
If the observed data point lies above the line, the residual is positive, and the line underestimates the actual data value for y. If the observed data point lies below the line, the residual is negative, and the line overestimates the actual data value for y.
The process of fitting the best-fit...
Calibration Curves: Linear Least Squares
For data that follow a straight line, the standard method for fitting is the linear...