Electrically driven motion of an air bubble on hemispherical oil/water interface by three-phase boundary reactions

Our electrochemical cell consisted of a ferrocene-included hemispherical nitrobenzene (NB) droplet on the glassy carbon (GC) electrode which was immersed in the aqueous solution including sodium sulfate and sodium dodecyl sulfate (SDS). When an air bubble was injected near the boundary between the oil and the aqueous phase, it stayed at the top of the hemisphere on the boundary so that the lower half of the bubble was put in oil and the other half was in water. From the force balance of surface tension and buoyancy of the bubble, the bubble took an energetic minimum at the interface. It sank into the oil phase when ferrocene in the oil was electrochemically oxidized through the GC electrode by the three-phase boundary reaction. The electrochemical reduction caused the bubble to move back toward the aqueous phase. The motion of the bubble was synchronized with the redox reaction of ferrocene. The potential step oxidation showed such a rapid response that the motion could not be attributed to diffusion of ferricenium ion from the three-phase boundary to the bubble. Our idea of explaining the rapidity was the translational motion of the SDS layer along the boundary, which was driven by the difference in the surface concentration of SDS caused by the electrochemical generation of the ferricenium ion. The motion of the SDS layer was demonstrated by the shrinkage of the oil layer spread on the water surface when SDS solution was dropped on the oil layer. The spreading velocity was close to the velocity of propagating the oxidation of ferrocene to the bubble.