Related Experiment Video
Updated: Jul 7, 2026

Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Removal of mercury from aqueous solutions using activated carbon prepared from agricultural by-product/waste
M Madhava Rao1, D H K Kumar Reddy, Padala Venkateswarlu
1Analytical and Environmental Chemistry Division, Department of Chemistry, Sri Venkateswara University, Tirupati 517 502, AP, India.
Abstract:
Removal of mercury from aqueous solutions using activated carbon prepared from Ceiba pentandra hulls, Phaseolus aureus hulls and Cicer arietinum waste was investigated. The influence of various parameters such as effect of pH, contact time, initial metal ion concentration and adsorbent dose for the removal of mercury was studied using a batch process. The experiments demonstrated that the adsorption process corresponds to the pseudo-second-order-kinetic models and the equilibrium adsorption data fit the Freundlich isotherm model well. The prepared adsorbents ACCPH, ACPAH and ACCAW had removal capacities of 25.88 mg/g, 23.66 mg/g and 22.88 mg/g, respectively, at an initial Hg(II) concentration of 40 mg/L. The order of Hg(II) removal capacities of these three adsorbents was ACCPH>ACPAH>ACCAW. The adsorption behavior of the activated carbon is explained on the basis of its chemical nature. The feasibility of regeneration of spent activated carbon adsorbents for recovery of Hg(II) and reuse of the adsorbent was determined using HCl solution.
Related Concept Videos
Bioremediation
Extracorporeal Removal of Drugs: Hemoperfusion and Hemofiltration
Microbial Bioremediation of Hydrocarbons
Extraction: Advanced Methods
Oxymercuration-Reduction of Alkenes
Microbial Leaching

