Theoretical analysis of physicochemical processes occurring during water treatment by ozone and ultraviolet radiation
N A Mishchuk1, V V Goncharuk, V F Vakulenko
1AV Dumansky Institute of Colloid Chemistry and Chemistry of Water, National Academy of Sciences of Ukraine, 42 Vernadskogo av, Kyiv 03142, Ukraine. nataliya@mis.kiev.ua
Abstract:
The paper presents a kinetic model developed for ozone dissolution in water and taking into account convective and diffusion processes occurring in the vicinity of floating bubbles that contain an ozone-air mixture. It was shown that the gradient of ozone concentration in a convective-diffusion layer and consequently the rate of ozone transfer from bubbles to the solution depended on the rate of ozone decomposition both in its reaction with organic admixtures and in the conditions of exposure to ultraviolet radiation. The obtained kinetic curves of destruction of organic compounds and changes of ozone concentration in water and ozone-air mixture are compared with experimental data for humic acids. The paper also analyzes additional factors affecting the kinetics of ozone dissolution and the rate of resultant reactions.
More Related Videos
05:46Identification of Pharmaceuticals in The Aquatic Environment Using HPLC-ESI-Q-TOF-MS and Elimination of Erythromycin Through Photo-Induced Degradation
Published on: August 1, 2018
14:17The Portable Chemical Sterilizer (PCS), D-FENS, and D-FEND ALL: Novel Chlorine Dioxide Decontamination Technologies for the Military
Published on: June 29, 2014
Related Concept Videos
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Biological Treatment of Effluent and Waste Water
Oxidative Cleavage of Alkenes: Ozonolysis
Ozone is a symmetrical bent molecule stabilized by a resonance structure.
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Microbial Wastewater Treatment
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
