Related Experiment Video
Updated: Jul 6, 2026

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
Removal of chromium (VI) by acid-washed zero-valent iron under various groundwater geochemistry conditions
1Civil, Architectural and Environmental Engineering Department, University of Texas at Austin, Austin, Texas 78712, USA.
Abstract:
The hexavalent chromium (Cr(VI)) removal capacity of acid-washed zerovalent iron (AW-Fe0) was evaluated under different groundwater geochemistry conditions through column experiments. It was found that each gram of the AW-Fe0 could remove 0.65-1.76 mg of Cr(VI) from synthetic groundwater in the absence of bicarbonate (HCO3-), magnesium and/or calcium ions. Groundwater geochemistry was found to exert various degrees of impact on Cr(VI) removal by the AW-Fe0, in which HCO3- alone gave the mildest impact whereas the copresence of calcium and HCO3- exerted the greatest impact In comparison with the unwashed Fe0, the AW-Fe0 showed a poorer Cr(VI) removal capacity and was also more susceptible to the influence of the dissolved groundwater constituents on Cr(VI) removal,thereby indicating the unsuitability of using AW-Fe0 in permeable reactive barriers for remediation of Cr(VI)-contaminated groundwater. On the AW-Fe0 surface, where the indigenous iron precipitates were almost erased, trivalent chromium including chromium (III) oxides, hydroxides, and oxyhydroxides in irregular strip, chick footmark-liked or boulder-liked forms as well as Cr(III)-Cr(VI) mixed oxides were detected.
More Related Videos
09:23Removal of Trace Elements by Cupric Oxide Nanoparticles from Uranium In Situ Recovery Bleed Water and Its Effect on Cell Viability
Published on: June 21, 2015
05:52Resource Recycling of Red Soil to Synthesize Fe2O3/FAU-type Zeolite Composite Material for Heavy Metal Removal
Published on: June 2, 2022
Related Concept Videos
Microbial Leaching
Microbial Bioremediation of Uranium
Extraction: Advanced Methods
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Precipitation and Co-precipitation
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...