Related Experiment Video

Updated: Jul 6, 2026

Measurement of X-ray Beam Coherence along Multiple Directions Using 2-D Checkerboard Phase Grating
10:39

Measurement of X-ray Beam Coherence along Multiple Directions Using 2-D Checkerboard Phase Grating

Published on: October 11, 2016

Effects of a Small Inclination Misalignment in Talbot Interferometry by use of Gratings with Arbitrary Line

Q Liu, R Ohba

    Applied Optics
    |March 25, 2008
    PubMed

    More Related Videos

    A Guide to Structured Illumination TIRF Microscopy at High Speed with Multiple Colors11:15

    A Guide to Structured Illumination TIRF Microscopy at High Speed with Multiple Colors

    Published on: May 30, 2016

    Fabrication of a Low-Cost, Fiber-Coupled, and Air-Spaced Fabry-Pérot Etalon07:22

    Fabrication of a Low-Cost, Fiber-Coupled, and Air-Spaced Fabry-Pérot Etalon

    Published on: February 3, 2023

    Related Concept Videos

    Inclination of a Line01:25

    Inclination of a Line

    The inclination of a line describes its angle of tilt with respect to the horizontal axis. While a line itself is an abstract object with no thickness, its orientation on the Cartesian plane is determined by its slope, which reflects how steeply it rises or falls. The inclination angle, always measured counterclockwise from the positive x-axis, varies between zero and π radians for nonhorizontal lines. This angle directly relates to the slope, providing a geometric interpretation of the line's...
    Beams with Unsymmetric Loadings01:17

    Beams with Unsymmetric Loadings

    Analyzing a supported beam under unsymmetrical loadings is essential in structural engineering to understand how beams respond to varied force distributions. This analysis involves calculating the deflection and identifying points where the slope of the beam is zero, which are crucial for ensuring structural stability and functionality.
    The first moment-area theorem determines the slope at any point on the beam. This theorem indicates that the change in slope between two points on a beam...
    Adjusting a Traverse01:12

    Adjusting a Traverse

    In the site survey of a four-sided traverse, internal angles are essential to ensure geometric accuracy. The survey revealed that the sum of the measured internal angles was 359 degrees and 48 minutes, which is 12 minutes less than the expected 360 degrees. This discrepancy signals an error likely arising from measurement inaccuracies during the fieldwork.To rectify this error, the adjustment process involved distributing the 12-minute shortfall equally across the four internal angles. By...
    Influence of Earth's Curvature and Atmospheric Refraction on Leveling01:26

    Influence of Earth's Curvature and Atmospheric Refraction on Leveling

    During leveling, the Earth's curvature and atmospheric refraction introduce deviations in the line of sight from a true horizontal reference. When the line of sight is leveled, it remains perpendicular to the plumb line only at a single point. Beyond this, it deviates due to the Earth’s curvature, represented by the correction C. For a sight distance D, the deviation can be derived using the relationship:This relationship shows that the deviation increases quadratically with distance. Over a...
    Derivatives of Inverse Trigonometric Functions01:30

    Derivatives of Inverse Trigonometric Functions

    A ship tracking an approaching aircraft relies on geometric measurements to find out the aircraft’s position relative to the observer. By measuring the slant distance to the aircraft and the angle of elevation, the horizontal and vertical components of the distance can be obtained using trigonometric relationships. This geometric approach provides a basis for analyzing how the observed angle changes as the aircraft moves closer to the ship.To examine the mathematical behavior of the angle of...
    Angle of Twist: Problem Solving01:13

    Angle of Twist: Problem Solving

    An electric motor applies a torque of 700 N·m to an aluminum shaft, triggering a stable rotation. Two pulleys, B and C, are subjected to torques of 300 N·m and 400 N·m, respectively. The modulus of rigidity is provided as 25 GPa. With the knowledge of the length and diameter of each segment, the twist angle between the two pulleys can be computed. First, a section cut is made between pulleys B and C, and the cut cross-section is analyzed using a free-body diagram. Given that the torque exerted...