Dynamic ultrasound-assisted extraction coupled on-line with solid support derivatization and high-performance liquid...

An on-line method was developed for the extraction, derivatization and determination of formaldehyde in textile samples. Formaldehyde was first extracted with water by ultrasound assisted, and directly introduced into a derivatization column which was packed with a moderately sulfonated cation-exchange resin. The resin used as solid support for the derivatization was charged with 2,4-dinitrophenylhydrazine (DNPH) previously. The formaldehyde DNPH derivative was eluted with the chromatographic mobile phase into an analytical column for the separation, and then monitored by UV detector. The maximum extraction yield was achieved when the extraction vessel was located at 10mm from the ultrasonic source and 10mg textile sample was extracted with 5mL pure water at a flow rate of 1.0mLmin(-1) at 50 degrees C. The detection limit of the proposed method was 0.06mgkg(-1). This method was applied to the determination of formaldehyde in different textile samples, and compared with the state standard method (off-line spectrophotometry) used in China. The similar contents of formaldehyde were obtained for most samples by the two methods, but little higher for some samples obtained by the proposed method. The average relative standard deviation (RSD) obtained by the on-line method was 3.2% which is lower than 29.5% obtained by the standard method.