Related Experiment Video
Updated: Jul 5, 2026

Versatile Technique to Produce a Hierarchical Design in Nanoporous Gold
Published on: February 10, 2023
Identification of surface heterogeneity effects in cyclic voltammograms derived from analysis of an individually
Chong-Yong Lee1, Yong-Jun Tan, Alan M Bond
1School of Chemistry, Monash University, Clayton, Victoria 3800, Australia.
Abstract:
Voltammetric behavior at gold electrodes in aqueous media is known to be strongly dependent on electrode polishing and history. In this study, an electrode array consisting of 100 nominally identical and individually addressable gold disks electrodes, each with a radius of 127 microm, has been fabricated. The ability to analyze both individual electrode and total array performance enables microscopic aspects of the overall voltammetric response arising from variable levels of inhomogeneity in each electrode to be identified. The array configuration was initially employed with the reversible and hence relatively surface insensitive [Ru(NH 3) 6] (3+/2+) reaction and then with the more highly surface sensitive quasi-reversible [Fe(CN) 6] (3-/4-) process. In both these cases, the reactants and products are solution soluble and, at a scan rate of 50 mV s (-1), each electrode in the array is assumed to behave independently, since no evidence of overlapping of the diffusion layers was detected. As would be expected, the variability of the individual electrodes' responses was significantly larger than found for the summed electrode behavior. In the case of cytochrome c voltammetry at a 4,4'-dipyridyl disulfide modified electrode, a far greater dependence on electrode history and electrode heterogeneity was detected. In this case, voltammograms derived from individual electrodes in the gold array electrode exhibit shape variations ranging from peak to sigmoidal. However, again the total response was always found to be well-defined. This voltammetry is consistent with a microscopic model of heterogeneity where some parts of each chemically modified electrode surface are electroactive while other parts are less active. The findings are consistent with the common existence of electrode heterogeneity in cyclic voltammetric responses at gold electrodes, that are normally difficult to detect, but fundamentally important, as electrode nonuniformity can give rise to subtle forms of kinetic and other forms of dispersion.
Related Concept Videos
Voltammetric Techniques: Cyclic Voltammetry
Electrogravimetric Analysis: Overview
To test the completeness of the...
Voltammetry: Overview
A voltammetric cell uses three electrodes: a working electrode, a reference electrode, and an auxiliary electrode. The redox reactions occur in the working...
Voltammetry: Factors Affecting Measurements
Voltammetric Techniques: Linear-Scan (E vs Time)
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...

