Related Experiment Video
Updated: Jul 5, 2026

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
Removal of disperse dye from aqueous solution by novel adsorbent prepared from biomass plant material
Ozgül Gerçel1, H Ferdi Gerçel, A Savaş Koparal
1Department of Environmental Engineering, Faculty of Engineering, Anadolu University, Iki Eylül Campus, 26555 Eskişehir, Turkey. ogercel@anadolu.edu.tr
Abstract:
The adsorption of Disperse Orange 25 (3-[N-ethyl-4-(4-nitrophenylazo) phenylamino] propionitrile) onto activated carbon was investigated in a batch system with respect to contact time, carbon dosage, pH and temperature from aqueous solutions. The Langmuir, Freundlich and Dubinin-Radushkevich (D-R) adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were also determined. The Langmuir isotherm model agrees with the experimental data well. Maximum adsorption capacity (qmax) of Disperse Orange 25 onto adsorbent was 118.93mgg(-1) at 20 degrees C. The first-order, pseudo-second-order kinetic models and the intraparticle diffusion model were used to describe the kinetic data and the rate constants were evaluated as well. The experimental data fitted very well to pseudo-second-order kinetic model. The results show that activated carbon prepared from Euphorbia rigida by sulfuric acid chemical activation could be employed as low-cost material to compare with commercial activated carbon for the removal of disperse dyes from effluents.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
10:31Diffuse Reflectance Infrared Spectroscopic Identification of Dispersant/Particle Bonding Mechanisms in Functional Inks
Published on: May 8, 2015