Related Experiment Video
Updated: Jul 5, 2026

Automated Hospital Room Disinfection Utilizing a Novel Aerosolized Hydrogen Peroxide Microdroplet Disbursing Technology
Published on: February 24, 2026
Comparative disinfection efficiency of pulsed and continuous-wave UV irradiation technologies
Zuzana Bohrerova1, Hilla Shemer, Robert Lantis
1Department of Civil and Environmental Engineering, Duke University, Durham, NC 27708, USA. bohrerz@duke.edu
Abstract:
Pulsed UV (PUV) is a novel UV irradiation system that is a non-mercury lamp-based alternative to currently used continuous-wave systems for water disinfection. PUV polychromatic irradiation disinfection efficiency was compared to that from continuous-wave monochromatic low-pressure (LP) and polychromatic medium-pressure (MP) UV systems, using two types of actinometry (ferrioxalate and iodide-iodate) and an absolute spectral emission method for fluence measurement. All three methods were in good agreement. Once accurate and reliable methods for fluence measurement were established, the inactivation of Escherichia coli and pathogen surrogates phage T4 and T7 were investigated under each technology. Inactivation was significantly faster using PUV irradiation compared to LP or MP UV lamps at equivalent fluence levels. A significant fraction of the enhanced PUV inactivation efficiency was due to wavelengths greater than 295 nm.
Related Concept Videos
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Antimicrobial Effectiveness
Hand hygiene
Hand washing...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...

