Related Experiment Video
Updated: Jul 5, 2026

Polymeric Microneedle Array Fabrication by Photolithography
Published on: November 17, 2015
Fabrication and characterization of ZnO nanoneedle array using metal organic chemical vapor deposition
Dongseok Park1, Youngjo Tak, Kijung Yong
1Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), San 31, Hyoja-dong, Nam-gu, Pohang, Kyungbuk 790-784, Korea.
Abstract:
High density and vertically well-aligned ZnO nanoneedle arrays were fabricated on the ZnO thin film deposited on silicon substrates. The ZnO buffer layer and nanoneedles were synthesized by metal organic chemical vapor deposition using diethylzinc and oxygen gas. The ZnO buffer film was grown at 250 degrees C and the growth temperature of nanoneedles was in the range of 480-500 degrees C. As-grown ZnO nanoneedles showed single crystalline structure of ZnO (002). The crystalline properties of three samples (A: as-deposited ZnO buffer layer, B: annealed buffer film, C: ZnO nanoneedles) were compared using XRD and Raman spectroscopy. The synthesized ZnO nanoneedles (sample C) showed highest crystalline quality among three samples. The field emission properties of ZnO nanoneedles were investigated, which showed low turn on field of 4.8 Vmicrom(-1) and high field enhancement factor of 3.2 x 103.

