Stratigraphic analysis of organic materials in wall painting samples using micro-FTIR attenuated total reflectance...

Wall paintings typically contain low concentrations of organic materials within a largely inorganic matrix and are characterised by their high porosity and long-term exposure to severe environmental conditions. The identification of organic materials within specific paint or plaster layers is challenging and the inherent characteristics of wall painting samples present further complications. Embedding materials (such as epoxy, polyester and acrylic-based resins) used to produce cross-sections often infiltrate porous and leanly bound samples, and compromise the interpretation of Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectra and the qualitative identification of natural organic materials. An alternative method for the preparation of cross-sections of wall painting samples was developed using cyclododecane (C(12)H(24)) as a temporary consolidant and barrier coating to encapsulate the sample, and to provide necessary support to produce a cross-section through microtoming. Impacts of traditional and novel sample preparation techniques on the identification of organic materials with micro-FTIR-ATR were examined for both replica and real wall painting samples.