Finite element analysis of intramedullary devices: the effect of the gap between the implant and the bone

This paper examines the interaction interface between the implant and the bone for an intramedullary femoral nailing system using a finite element (FE) model and specifically considers the hypothesis that the local geometry at the interface is significant to the resulting localized contact stress between the medial and lateral aspect of nail and endosteum. Contact mechanics algorithms are used in the FE modelling technique that can be developed to deal with any form of intramedullary device for which contact at the bone-implant interface is important. Global stiffness data from the FE model are compared with available data from an experiment carried out on a construct of the bone and the device that uses intramedullary femoral nails. Acceptable agreement is obtained. The results demonstrate that the mechanical interface between the implant and the bone is significantly affected by the gap geometry and magnitude. In particular, larger gaps lead to greater concentrations of stress on the medial side, while the distribution of stress is more uniform at the lateral contacts. Furthermore, the results show that the gap can have a marked effect on the stresses that occur on the fracture plane.