Related Experiment Video
Updated: Jul 4, 2026

Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Influence of cationic surfactant on adsorption of Cr(VI) onto activated carbon
Hyun-Doc Choi1, Jung-Min Cho, Kitae Baek
1Department of Environmental Engineering, Kumoh National Institute of Technology, 1 Yangho-dong, Gumi, Gyeongbuk 730 701, Republic of Korea.
Abstract:
The effect of a cationic surfactant on the adsorption of Cr(VI) on activated carbon was investigated using cetylpyridinium chloride (CPC). At a concentration below the critical micelle concentration (CMC) of CPC, the adsorption of CPC and Cr(VI) reached equilibrium within 60 min, while it took 180 min at the concentration above CMC. CPC decreased the adsorption rate of Cr(VI) and increased the adsorption amount of Cr(VI) onto activated carbon. To analyze adsorption phenomena of Cr(VI), adsorption kinetic and isotherm were used and fitted well with the pseudo-second order kinetic model and Langmuir adsorption model, respectively. CPC introduced a cationic functional group on the surface of activated carbon and provided an adsorption site for Cr(VI).
Related Concept Videos
Colloidal precipitates
Factors Affecting Activity Coefficient
The activity coefficient value for an ion is close to one when the solution has almost zero ionic strength, i.e., when the solution shows close to ideal behavior. As the ionic strength of the solution increases from 0 to 0.1 mol/L, a decrease in the...
Factors Affecting Solubility
Micelles
Ion Exchange
Surface Active Agents

