Adsorption of radium-226 by biological origin absorbents

Selected samples of waste microbial biomass used in industrial fermentation processes and wastewater biological treatment plants have been studied for their radium biosorption ability from aqueous solutions. Equilibrium biosorption isotherms have been used to quantify the radium uptake capacity of the various types of biomass which were also compared to two types of activated carbon. Solution pH affected the observed uptake significantly. In general, the biomass types that showed appreciable sorption capacity exhibited maximum uptake between pH 7 and 10. The uptake was reduced considerably at pH 4 and little or no uptake was observed at pH 2. Radium biosorptive uptake capacities of the order of 4.5 x 10(4) nCi/g, at pH 7 and at an equilibrium radium concentration of 1000 pCi/L, were determined for a mixed culture, while the biomass of Penicillium chrysogenum adsorbed 5 x 10(4) nCi/g radium under the same conditions. The highest uptake value for a sample of F-400 granular activated carbon was 3600 nCi/g at pH 7 and 1000 pCi/L radium concentration. The biosorptive radium uptake of microbial biomass is compared to literature values for other types of adsorbents. The most effective biomass types studied exhibited radium removals in excess of 99% of the radium in solution.