Related Experiment Video
Updated: Jul 4, 2026

Experimental Methods for Investigation of Shape Memory Based Elastocaloric Cooling Processes and Model Validation
Published on: May 2, 2016
Design and performance of personal cooling garments based on three-layer laminates
M Rothmaier1, M Weder, A Meyer-Heim
1Empa, Swiss Federal Laboratories for Materials Testing and Research, Laboratory for Protection and Physiology, 9014, St. Gallen, Switzerland. markus.rothmaier@empa.ch
Abstract:
Personal cooling systems are mainly based on cold air or liquids circulating through a tubing system. They are weighty, bulky and depend on an external power source. In contrast, the laminate-based technology presented here offers new flexible and light weight cooling garments integrated into textiles. It is based on a three-layer composite assembled from two waterproof, but water vapor permeable membranes and a hydrophilic fabric in between. Water absorbed in the fabric will be evaporated by the body temperature resulting in cooling energy. The laminate's high adaptiveness makes it possible to produce cooling garments even for difficult anatomic topologies. The determined cooling energy of the laminate depends mainly on the environmental conditions (temperature, relative humidity, wind): heat flux at standard climatic conditions (20 degrees C, 65% R.H., wind 5 km/h) has measured 423.2 +/- 52.6 W/m(2), water vapor transmission resistance, R (et), 10.83 +/- 0.38 m(2) Pa/W and thermal resistance, R (ct), 0.010 +/- 0.002 m(2) K/W. Thermal conductivity, k, changed from 0.048 +/- 0.003 (dry) to 0.244 +/- 0.018 W/m K (water added). The maximum fall in skin temperature, Delta T (max), under the laminate was 5.7 +/- 1.2 degrees C, taken from a 12 subject study with a thigh cooling garment during treadmill walking (23 degrees C, 50% R.H., no wind) and a significant linear correlation (R = 0.85, P = 0.01) between body mass index and time to reach 67% of Delta T (max) could be determined.
More Related Videos
08:50Fabrication and Characterization of a Conformal Skin-like Electronic System for Quantitative, Cutaneous Wound Management
Published on: September 2, 2015
06:26Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method
Published on: October 6, 2017
Related Concept Videos
Mechanism of heat transfer
Mechanisms of Heat Transfer II
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant heat.
Mechanisms of Heat Transfer I
Thermoregulation