Related Experiment Video
Updated: Jul 4, 2026

Design and Use of a Full Flow Sampling System (FFS) for the Quantification of Methane Emissions
Published on: June 12, 2016
Probing emissions of military cargo aircraft: description of a joint field measurement Strategic Environmental
Meng-Dawn Cheng1, Edwin Corporan, Matthew J DeWitt
1Environmental Sciences Division, Oak Ridge National Laboratory (ORNL), Oak Ridge, TN 37831-6038, USA. chengmd@ornl.gov
Abstract:
To develop effective air quality control strategies for military air bases, there is a need to accurately quantify these emissions. In support of the Strategic Environmental Research and Development Program project, the particulate matter (PM) and gaseous emissions from two T56 engines on a parked C-130 aircraft were characterized at the Kentucky Air National Guard base in Louisville, KY. Conventional and research-grade instrumentation and methodology were used in the field campaign during the first week of October 2005. Particulate emissions were sampled at the engine exit plane and at 15 m downstream. In addition, remote sensing of the gaseous species was performed via spectroscopic techniques at 5 and 15 m downstream of the engine exit. It was found that PM mass and number concentrations measured at 15-m downstream locations, after dilution-correction generally agreed well with those measured at the engine exhaust plane; however, higher variations were observed in the far-field after natural dilution of the downstream measurements was accounted for. Using carbon dioxide-normalized data we demonstrated that gas species measurements by extractive and remote sensing techniques agreed reasonably well.
More Related Videos
Related Concept Videos
Measurement of Air Content in Concrete
The pressure method,...
Atomic Emission Spectroscopy: Lab
Atomic Emission Spectroscopy: Interference
Atomic Emission Spectroscopy: Overview
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used.
Applications of EMF Measurements

