Related Experiment Video
Updated: Jul 3, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Reactivity of alkaline lignite fly ashes towards CO2 in water
Martin Back1, Michael Kuehn, Helge Stanjek
1Department of Hydrology, University of Bayreuth, BayCEER, D-95440 Bayreuth, Germany. martin.back@uni-bayreuth.de
Abstract:
The reaction kinetics between alkaline lignite fly ashes and CO2 (pCO2 = 0.01--0.03 MPa)were studied in a laboratory CO2 flow-through reactor at 25--75 degrees C. The reaction is characterized by three phases that can be separated according to the predominating buffering systems and the rates of CO2 uptake. Phase I (pH > 12, < 30 min) is characterized by the dissolution of lime, the onset of calcite precipitation and a maximum uptake, the rate of which seems to be limited by dissolution of CO2. Phase II (pH < 10.5, 10--60 min) is dominated by the carbonation reaction. CO2 uptake in phase III (pH < 8.3) is controlled by the dissolution of periclase (MgO) leading to the formation of dissolved magnesium-bicarbonate. Phase I could be significantly extended by increasing the solid-liquid ratios and temperature, respectively. At 75 degrees C the rate of calcite precipitation was doubled leading to the neutralization of approximately 0.23 kg CO2 per kg fly ash within 4.5 h, which corresponds to nearly 90% of the total acid neutralizing capacity.
More Related Videos
06:34Operation of a 25 KWth Calcium Looping Pilot-plant with High Oxygen Concentrations in the Calciner
Published on: October 25, 2017
07:42Green Synthesis, Characterization, Encapsulation, and Measurement of the Release Potential of Novel Alkali Lignin Micro-/Submicron Particles
Published on: March 1, 2024
Related Concept Videos
Pozzolans
Fly ash is a...
Alkali Aggregate Reaction in Concrete
Acid Attack on Concrete
The rate at which hydrogen...
Hydration of Cement
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...