Growth kinetics of Lactobacillus acidophilus under ohmic heating

Lactobacillus acidophilus OSU133 was inoculated into MRS broth in a fermenter vessel and incubated at 30, 35, or 45 degrees C with agitation. Incubation temperatures were attained by conventional or ohmic heating. An electrical current at low (15 V) or high (40 V) voltage was used to heat the culture directly during fermentations under ohmic heating. The growth parameters (lag period, minimum generation time, and maximum growth) and changes in pH were determined during fermentation. Metabolic activities (consumption of glucose and production of lactic acid and bacteriocin) were determined during fermentation at 35 degrees C under both heating methods. Lag period for L. acidophilus was affected appreciably by the method of heating, but the magnitude of these changes depended on the fermentation temperature. When fermentation was done at 30 degrees C, lag period decreased by 94% under low-voltage ohmic, compared with conventional, heating methods. Ohmic heating did not change the generation time significantly and caused slight, but significant (p < 0.01) decrease in maximum growth. Therefore, the electric current enhances the early stages, but it inhibits the late stages of growth. Ohmic, compared with conventional, heating resulted in higher final pH and lower bacteriocin activity in the fermented medium. However, ohmic heating at 35 degrees C had minimal effect on glucose utilization and lactic acid production by L. acidophilus. Results show that measurement of the electric current when ohmic heating is done at a constant voltage may be used in monitoring such fermentations. In conclusion, ohmic heating is potentially useful in certain applications related to fermented foods. (c) 1996 John Wiley & Sons, Inc.