Related Experiment Video
Updated: Feb 10, 2026

The Microscopy-Based Assay to Study and Analyze the Recycling Endosomes using SNARE Trafficking
Published on: February 12, 2022
Chemical activation in view of MSWI bottom ash recycling in cement-based systems
A Polettini1, R Pomi, E Fortuna
1Department of Hydraulics, Transportation and Roads, University of Rome "La Sapienza", Via Eudossiana 18, 00184 Rome, Italy. alessandra.polettini@uniroma1.it
Abstract:
In the present study, the feasibility of recycling incinerator bottom ash in cementitious systems by means of chemical activation was investigated. Different Na-, K- and Ca-based hydroxides and salts were selected for the experiments on the basis of their recognized effects on activation of typical pozzolanic materials. The evolution of mechanical properties of bottom ash/Portland cement mixtures and the leaching of trace metals from the materials were a matter of major concern. The experiments were arranged according to a full factorial design, which also allowed to derive a predictive model for unconfined compressive strength as affected by bottom ash content as well as activator type and dosage. Among the activators tested, calcium chloride was found to affect mechanical strength far more positively than the other species used, at the same time ensuring low metal release from the material. On the other hand, the use of potassium sulfate was observed to cause a significant increase in metal leaching at pH<12, which was probably associated to the release of contaminants initially immobilized within the structure of ettringite as soon as it converted into monosulfate over time.
Related Concept Videos
Hydration of Cement
Soundness of Cement
Thermodynamics: Chemical Potential and Activity
The thermodynamic equilibrium constant is more accurately defined in terms of activity rather than concentration.
Portland Cement
Fineness of Cement
Direct...
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...

