Related Experiment Video
Updated: Jul 3, 2026

An Anaerobic Biosensor Assay for the Detection of Mercury and Cadmium
Published on: December 17, 2018
Assessment of interference in biosorption of a heavy metal
M M Figueira1, B Volesky, V S Ciminelli
1Department of Chemical Engineering, McGill University, Montreal, Quebec H3A 2A7, Canada.
Abstract:
Nonliving biomass of Sargassum, a brown marine alga, is capable of binding more than 10% of its dry weight in toxic cadmium ions. Although ubiquitous iron interferes with Cd uptake, only approximately 4.5% of it is sequestered (biomass dry weight). Biosorption of both metals at ph 4.5 could be described by Langmuir-type isotherms with b, the affinity-related coefficient (Cd: b = 0.015; Fe: b = 0.027). The interference of Fe with Cd uptake, and vice versa, was assessed by deriving three-dimensional equilibrium two-metal sorption isotherm surfaces, smoothed and "cut" to reveal the inhibition effect of Fe on biosorption of Cd: at the equilibrium concentration Cf[Cd] = 1.5 mM, the presence of Fe at 1.5 mM equilibrium concentration suppressed the Cd uptake to only 76% of the original value. For 50% Cd uptake reduction, a very high equilibrium Fe presence of 4.5 mM was required. The Cd presence affected the uptake of Fe very strongly. To obtain equal values of uptake for each metal in the biosorbent, the ratio of equilibrium concentrations of 0.42 Cd to 1 Fe is necessary in the liquid phase. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 54: 344-350, 1997.
Related Concept Videos
Extraction: Advanced Methods
Microbial Bioremediation of Uranium
Atomic Absorption Spectroscopy: Interference
Spectral interference occurs when signals from other elements or molecules overlap with the analyte signal, falsely elevating or masking the analyte's absorbance. This interference can be corrected using Zeeman,...
Inductively Coupled Plasma-Mass Spectrometry (ICP-MS): Interferences
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Microbial Leaching

