Related Experiment Video
Updated: Jul 3, 2026

Characterizing Dissipative Elastic Metamaterials Produced by Additive Manufacturing
Published on: June 28, 2024
Analytical model for viscous damping and the spring force for perforated planar microstructures acting at both
Dorel Homentcovschi1, Ronald N Miles
1Department of Mechanical Engineering, SUNY Binghamton, Binghamton, NY 13902-6000, USA. homentco@binghamton.edu
Abstract:
The paper presents a model for the squeezed film damping, the resistance of the holes, and the corresponding spring forces for a periodic perforated microstructure including the effects of compressibility, inertia, and rarefied gas. The viscous damping and spring forces are obtained by using the continuity equation. The analytical formula for the squeezed film damping is applied to analyze the response of an ultrasonic transducer. The inclusion of these effects in a model significantly improves the agreement with measured results. Finally, it is shown that the frequency dependence of the total damping and total spring force for a cell are very similar to those corresponding to a rectangular open microstructure without holes. A separate analysis reveals the importance of each particular correction. The most important is the compressibility correction; the inertia has to be considered only for determining the spring force and the damping force for sufficiently high frequencies.
Related Concept Videos
Types of Damping
Damped Oscillations
Although friction and other non-conservative...
Mechanical Systems
Design Example: Underdamped Parallel RLC Circuit
Starting with a fixed...
Sound as Pressure Waves
The pressure fluctuation depends on the difference in displacements between the successive points in the...
Deriving the Speed of Sound in a Liquid
The speed of sound in fluids can be derived by considering a mechanical wave propagating...
