Extending the quantitative assessment of industrial risks to earthquake effects

In the general framework of quantitative methods for natural-technological (NaTech) risk analysis, a specific methodology was developed for assessing risks caused by hazardous substances released due to earthquakes. The contribution of accidental scenarios initiated by seismic events to the overall industrial risk was assessed in three case studies derived from the actual plant layout of existing oil refineries. Several specific vulnerability models for different equipment classes were compared and assessed. The effect of differing structural resistances for process equipment on the final risk results was also investigated. The main factors influencing the final risk values resulted from the models for equipment vulnerability and the assumptions for the reference damage states of the process equipment. The analysis of case studies showed that in seismic zones the additional risk deriving from damage caused by earthquakes may be up to more than one order of magnitude higher than that associated to internal failure causes. Critical equipment was determined to be mainly pressurized tanks, even though atmospheric tanks were more vulnerable to containment loss. Failure of minor process equipment having a limited hold-up of hazardous substances (such as pumps) was shown to have limited influence on the final values of the risk increase caused by earthquakes.