Linking stream and landscape trajectories in the southern Appalachians

Edward P Gardiner1, Andrew B Sutherland, Rebecca J Bixby

  • 1American Museum of Natural History, New York, NY 10024, USA. ned@amnh.org

Related Concept Videos

Streamlines, Streaklines, and Pathlines01:18

Streamlines, Streaklines, and Pathlines

A streamline represents the trajectory that is always tangent to the fluid's velocity vector at any given point. The velocity of a fluid particle is always directed along the streamline, ensuring the particle continuously follows the streamline's path. Streamlines are particularly useful for visualizing the overall direction of flow in a fluid system, and they provide an instantaneous representation of the flow's velocity field. In steady flow, where conditions do not change over time,...
Adjusting a Traverse01:12

Adjusting a Traverse

In the site survey of a four-sided traverse, internal angles are essential to ensure geometric accuracy. The survey revealed that the sum of the measured internal angles was 359 degrees and 48 minutes, which is 12 minutes less than the expected 360 degrees. This discrepancy signals an error likely arising from measurement inaccuracies during the fieldwork.To rectify this error, the adjustment process involved distributing the 12-minute shortfall equally across the four internal angles. By...
Stream Function01:20

Stream Function

In two-dimensional incompressible fluid flow, the continuity equation is essential for ensuring mass conservation, meaning that any change in fluid entering or exiting a region is balanced by a corresponding change elsewhere. For incompressible flow, where density remains constant, this requirement simplifies to the condition that the divergence of the velocity field must be zero. Mathematically, this is expressed as,
Steady Flow of a Fluid Stream01:27

Steady Flow of a Fluid Stream

Consider a control volume, such as a pipe with solid boundaries, through which fluid flows and changes direction due to the impulse exerted by the resulting force from the pipe walls. In steady flow, the mass of fluid entering the control volume at a given time, t, with velocity v1, is equal to the mass leaving after infinitesimal time dt, with velocity v2.
During this process, the momentum of the fluid within the control volume remains constant over the time interval dt. By applying the...
Methods of Obtaining Topography01:25

Methods of Obtaining Topography

Topography involves measuring and mapping land elevations, natural features, and artificial structures to create accurate representations of the terrain. Topographic surveying relies on traditional and modern methods, each with distinct advantages and limitations.Traditional Surveying Methods:Transit stadia surveys and plane table surveys were widely used traditional surveying methods. These techniques relied on instruments like theodolites and stadia rods for measuring distances and angles,...
Gradually Varying Flow01:29

Gradually Varying Flow

Gradually varying flow (GVF) in open channels describes situations where water depth changes slowly along the channel due to factors like non-uniform bed slope, channel shape variations, or obstructions. This flow type occurs when the depth adjusts gradually to balance gravitational forces, shear forces, and energy requirements, resulting in a low rate of depth change.Characteristics of Gradually Varying FlowGVF is commonly observed in natural streams, rivers, and canals, where flow depth...