Related Experiment Video
Updated: Jul 2, 2026

Determination of the Settling Rate of Clay/Cyanobacterial Floccules
Published on: June 11, 2018
Relationship between floc composition and flocculation and settling properties studied at a full scale activated
Britt-Marie Wilén1, Doug Lumley, Ann Mattsson
1Department of Civil and Environmental Engineering, Water Environment Technology, Chalmers University of Technology, Sven Hultins gata 8, SE-412 96 Göteborg, Sweden. britt-marie.wilen@chalmers.se
Abstract:
The variation in activated sludge floc composition, flocculation and settling properties was studied at a full scale plant over a 2-year period. A comprehensive set of process parameters was analysed and related to the floc properties to increase the understanding of the factors affecting floc formation. The composition of the activated sludge showed a seasonal change with higher concentrations of extractable extracellular polymeric substances (EPS) during the winter months. The protein content of the total sludge and EPS increased significantly during the winter. This coincided with higher effluent suspended solids concentrations and increased shear sensitivity of the sludge flocs. Only poor correlations between EPS contents and stirred sludge volume index (SSVI) could be observed. High iron concentrations in the sludge due to dosage of iron salt to precipitate phosphorus were found to have a negative impact on the settling and compaction properties of the sludge, whereas it had a positive impact on floc stability. Higher organic loading due to by-passed primary settlers leads to improved settling and compaction properties.
Related Concept Videos
Coagulation
Colloidal precipitates
Factors Affecting Dissolution: Particle Size and Effective Surface Area
Colloids
Colloids and Suspensions
The Colloidal State

