Related Experiment Video
Updated: Jul 1, 2026

Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Theoretical analysis and enhanced nitrogen removal performance of step-feed SBR
Jianhua Guo1, Yongzhen Peng, Qing Yang
1School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin, China. jianhuaguo316@yahoo.com.cn
Abstract:
To achieve high nitrification and denitrification rates, step-feed SBR with multiple aerobic and anoxic phases was adopted to study nitrogen removal performance. Theoretical analysis of step-feed SBR was presented first, from which feeding steps and C/N ratio had significant influences on nitrogen removal performance. Total nitrogen removal efficiency would increase with increasing of feeding steps, while the increasing extent was not distinct with feeding steps above 4. At a given feeding step, nitrogen removal efficiency would also increase with increasing of C/N ratio. Experimental work was conducted in a lab-scale SBR to investigate practical effects of these critical factors, using real municipal wastewater. The results showed when C/N ratio was appropriately decreasing influent flow mode could achieve enhanced nitrogen removal with less adding of external carbon source, compared with equal influent flow mode. Three-step equal influent flow mode was recommended to treat common municipal wastewater in view of operation complexity. Non steady-state experiments over about three months confirmed step-feed SBR was an enhanced nitrogen removal process with high efficiency. Total nitrogen in the effluent was under 2 mg/L, the average removal efficiency achieved for TN was over 97% just adding a little external carbon source, and good sludge settleability was obtained.
Related Concept Videos
Biological Treatment of Effluent and Waste Water
Bioreactor Design and Operational System
Microbial Wastewater Treatment
Rate-Determining Steps
In a multistep reaction mechanism, one of the elementary steps progresses significantly slower than the others. This slowest step is called the rate-limiting step (or rate-determining step). A reaction cannot proceed faster than its slowest step, and hence, the rate-determining step limits the overall reaction rate.
The concept of rate-determining step can be understood from the analogy of a 4-lane freeway with a short-stretch of traffic-bottleneck caused due to...
Microbes and the Nitrogen Cycle

