A restoratively driven ridge categorization, as determined by incorporating ideal restorative positions on...

The introduction of implants into the field of dentistry has revolutionized the way we evaluate edentulous ridges. In an attempt to evaluate the deficient edentulous ridge, numerous classification systems have been proposed. Each of these classification systems implements a different approach for evaluating and planning treatment for the ridge deficiency.

The purpose of the present investigation was to propose a restoratively driven ridge categorization (RDRC) for horizontal ridge deformities based on an ideal implant position as determined through implant simulation, utilizing computed tomography (CT) scan images.

Radiographic templates were developed to capture the ideal restorative tooth position. Measurements were performed using CT scan software in a cross-sectional view and by virtual placement of a parallel-sided implant with a 3.25-mm diameter.

Edentulous ridges were divided into five groupings: Group I, simulated implants with at least 2 mm of facial bone, accounted for 19.4% of ridges; Group II, simulated implant completely surrounded by bone, with less than 2 mm of facial plate thickness, accounted for 10.4% of ridges; Group III, wherein dehiscences are detected but no fenestrations are present, accounted for 33.3% of ridges; Group IV, wherein fenestrations are detected but no dehiscence is present, accounted for 6.3% of ridges; and Group V, wherein both dehiscences and fenestrations are present, accounted for 30.6% of ridges.

The use of RDRC indicates that a high number of cases in the maxillary anterior area would require augmentation procedures in order to achieve ideal implant placement and restoration.