Related Experiment Video
Updated: Jun 30, 2026

Techniques for the Evolution of Robust Pentose-fermenting Yeast for Bioconversion of Lignocellulose to Ethanol
Published on: October 24, 2016
[gTME for construction of recombinant yeast co-fermenting xylose and glucose]
Hongmei Liu1, Lin Xu, Ming Yan
1State Key Laboratory of Materials-Oriented Chemical Engineering, College of Life Science and Pharmaceutical Engineering, Nanjing University of Technology, Nanjing 210009, China.
Abstract:
Global transcription machinery engineering (gTME) was employed to engineer xylose metabolism. Mutation of the transcription factor gene Sptl5 was introduced by error-prone PCR, followed by screening on media using xylose as the sole carbon source. One recombinant strain growing well on such media was chosen for further research. This strain showed modest growth rates in the media containing 50 g/L xylose or glucose at the condition of 30 degrees C, 200 r/min, 96 h, 94.0% and 98.9% of xylose and glucose were consumed, with the ethanol yield were 32.4% and 31.6%, respectively. The control strain had the ethanol yield of 44.3% under the glucose concentration of 50 g/L. When the carbon source was 50 g/L glucose/xylose (1:1), the utilization ratio of xylose and glucose was 91.7% and 85.9%, with the ethanol yield was 26%. Xylose was eventually exhausted. Concentration of the by-product xylitol was very low.
More Related Videos
Related Concept Videos
Production of Alcohol
Bioreactor Controls-III
Microbial Fermentation
Yeast Signaling
Fermentation
Fermentation is a type of metabolic process that occurs in the absence of oxygen, where organic molecules such as glucose are broken down to produce energy. During this process, the...
Microbes in Beverage Production

