Temperature variation on the external root surface during intracanal Er:YAG laser irradiation

To evaluate the temperature changes on the root's external surface during Er:YAG laser irradiation with different tips and pulse repetition rates.

There have been limited reports that correlate temperature variations with Er:YAG laser irradiation using different tips and pulse repetition rates.

Sixty roots of central incisors were sectioned 10 mm from the apex, biomechanically prepared, embedded in acrylic resin, and randomly distributed into six groups: the teeth in group I, group II, and group III were irradiated with an Opus 20 laser with a sapphire tip at 8, 10, and 15 Hz, respectively; the teeth in group IV, group V, and group VI were irradiated with the fiberoptic tip of a Kavo Key laser at 6, 10, and 15 Hz, respectively. Laser irradiation was applied for 20 sec to all teeth and temperature changes were recorded with thermocouples in the root surfaces.

There were significant differences (p < 0.05) among pulse repetition rates: 6 and 8 Hz (2.36 degrees +/- 0.91 degrees C), 10 Hz (4.92 degrees +/- 1.60 degrees C), and 15 Hz (8.23 degrees +/- 2.78 degrees C); and radicular thirds: apical (8.33 degrees +/- 2.69 degrees C), middle (4.70 degrees +/- 1.60 degrees C), and cervical (2.48 degrees +/- 0.83 degrees C). No significant differences were seen between the two types of laser tips used (p > 0.05).

The temperature changes on root external surfaces remained above the critical threshold (13 degrees C) during Er:YAG laser irradiation, except for irradiation with 15 Hz in the apical third. However, the type of Er:YAG laser tip used (sapphire or fiberoptic) did not affect the temperature variation.