Copper(I) sulphide-impregnated silicone rubber membranes as selective electrodes for copper(II) ions
1Wireless Research Laboratory Matsushika Electric Industrial Co. Ltd. Kadoma, Osaka, Japan.
Talanta
|September 1, 1970
Abstract:
Silicone rubber membranes impregnated with copper(I) sulphide have been developed as selective electrodes for coppefr(II) ions. The internal electrode and solution were eliminated. The Nernst equation was satisfied in the concentration range from 10(-1) to 10(-6)M copper(II) and the analytical range was from 10(-1) to 10(-7)M. The interference of other ions was examined. Other resins were compared with silicone rubber as inert matrices.
More Related Videos
Related Concept Videos
Potentiometry: Membrane Electrodes
Membrane electrodes, also known as p-ion electrodes, use membranes that selectively interact with free analyte ions, generating a potential difference across the membrane. The resulting membrane potential, known as the asymmetry potential, is not zero even when analyte concentrations on both sides of the membrane are equal. The membrane's response is typically not selective to a single analyte but proportional to the concentration of all ions in the sample solution capable of interacting at the...
Ion-Exchange Chromatography
Ion-exchange chromatography, or IEC, is a technique for separating ions based on their affinity for the stationary phase. The stationary phase is a cross-linked polymer resin with covalently attached ionic functional groups. The functional groups can be either positively charged (cation exchangers) or negatively charged (anion exchangers). A cation exchanger consists of a polymeric anion and active cations, while an anion exchanger is a polymeric cation with active anions. The choice of...
Electrodeposition
Electrodeposition is a technique used to separate an analyte from interferents by electrochemical processes. Here, the analyte is a metal ion that can be deposited on an electrode immersed in the sample solution. The electrochemical setup consists of an anode and a cathode. When an electric current is applied to the setup, oxidation occurs at the anode. At the cathode, which consists of a large metal surface, metal ions undergo reduction and deposit onto the surface.
Electrodeposition can...
Electrodeposition can...
Types of Reversible Electrodes
For electrode reversibility to be maintained, all the reactants and products involved in the half-reaction must be present at the electrode. There are several types of reversible electrodes (half-cells).In metal-metal-ion electrodes, a metal balances electrochemically with a solution of its own ions. Examples are Cu2+|Cu and Zn2+|Zn. Metals that react with the solvent, like group 1 and most group 2 metals, which react with water, and zinc, which reacts with aqueous acidic solutions, cannot be...


